Material Feeding System

In al process operations, material feeding is an important operation that controls the amount of raw materials fed into the system for conversion into the finished product. Gudhi Engineering has developed Feeder machanism for dry products as well as liquids

Screw Feeder

Screw Feeder is a single or twin scew volumetric feeder driven by a suitable motor and gearbox. It is used to feed powders, granules etc. The material to be fed is placed in the hopper and the feed is controlled in a measured form.

Capacity : 100gm/ hr to 100kg/hr
M.O.C : SS304, SS316, SS3161, Teflon, PP, Nylon etc.
Control Panel : Non FLP,FLP, with electric control panel designed as per Indian Electric Standard norms. The machine is operated by using push buttons that have been provided.
Control Panel : Non FLP,FLP, with electric control panel designed as per Indian Electric Standard norms. The machine is operated by using push buttons that have been provided.
SALENT FEATURES : simplest

Rotary Valve

The Valve is designed with a rotor in the circulat hosing and is driven by a suitable motor and gear box. The blades of the rotor create a suitable motor and gear box. The blades of the rotor create a triangular pocket. As the motor rotates the blades, material from the hopper gets discharged into this pocket. As it moves further, the material is fed directly down from the bottom of the outlet.

Capacity : M.O.C :Control Panel :
1kg/ hr to 100kg/hr


 SS304, SS316, SS3161, Teflon, PP, Nylon etc.


 Non FLP,FLP, with electric control panel designed as per Indian Electric Standard norms. The machine is operated by using push buttons that have been provided.

Automatic Liquid Filling Machine

Gudhi Engineering has developed a special purpose machine for Automatic Liquid Filling for two batching stages. The Pipeline is connected from the tank outlet to the Mass Flow meter and then to the Peristaltic Pump. The Coarse or Fine batch volume can be set in the controller. When given the start command from the controller, the liquid will start flowing from the Mass Flow Meter. The Flow meter will sense the flow volume and will deliver it to the Peristalti Pump at high speed. Once the course volume is achieved, Then the Mass Flow Meter will sense the volume and deliver into the Peristaltic pump at low speed. When the desired volume is achieved, the machine will stop automatically

Control Panel : FLP,Electric control panel is provided.